TrackIR 8020 Sim Rig Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this to mount a TrackIR to an 8020 aluminum profile rig for sim racing. Place the sensor upside down in the…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 910
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed this to mount a TrackIR to an 8020 aluminum profile rig for sim racing. Place the sensor upside down in the holder and invert the settings 180 degrees in the TrackIR software for it to track properly. Uses M4 hardware to attach the swivel to the arm, M3 hardware in the hinges, and M6 to mount it to the 8020 chassis. Bonus TrackIR Pro Clip storage area on TrackIR_Mount_Bracket.stl as seen in the picture!
I printed this with 40% infill for a little extra rigidity but lower infill may also work.
If you'd like to donate for my efforts, you can do so here. 🙂 https://www.paypal.com/donate/?hosted_button_id=CDX7C23F9L8X4
Category: Toy & Game Accessories