N64 Cartridge Wall Hanger - Oversized - Optimized Pins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed model with pins printed as a separate piece to ease support removal and facilitate multi-material pins.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 345
- Wydruki
- 5
- Wyświetlenia
- 2275
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed model with pins printed as a separate piece to ease support removal and facilitate multi-material pins.
I've have been making giant N64 cartridges using the original model by Michael Winston.
I decided to remix the model and print the pins as a separate piece for two main reasons:
- The supports around the pins were difficult to remove cleanly and efficiently
- To allow easy multi-material printing of the pins for more realistic N64 cartridges
Pieces fit together very snug but you can glue them for extra durability.
Labels are printed on vinyl sticker paper.
I use 5% Gyroid infill with snug supports.
I've tried many different gray filaments and the most accurate I've found so far is Hatchbox Cool Gray PLA as seen in the example pictures.
Updated 4/21/2024 - Re-uploaded pins to be matching scale as cartridge by default.
If you have the old model either scale the cartridge to 160% or the pins to 62.5%. Or download the new pin model.