HomeBrew WiFi/BT/GPS for Celestron AUX (OLD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for the PCB by ni2o for the HomeBrew WiFi/BT/GPS for the Celestron AUX created by Mark Lord
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 1074
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
EDIT: there is a newer and improved box version here: https://www.prusaprinters.org/prints/113538-box-for-the-homebrew-pcb-wifibluetoothgps-accessor
Enclosure for the SMD PCB created by ni2o (https://github.com/g7ltt/Celestron-GPS-WiFi-BT-Interface) for the Celestron GPS/WiFi/Bluetooth accessory for the AUX port.
You find all the links, BOM, Gerbers and explanations in the GitHub above.
Needs
- 2x M3x20 self-tapping screws to fix the enclosure cover,
- 4x M2x10 hex bolts/nuts to secure the OLED screen that monitors the GPS.
I added two stencils to spraypaint the cover with the switch functions, should you feel the need to add labels.
I printed it successfully on my Mk3S with silver Prusament PLA at 0.2mm with supports (few spots).
Of course if you change the components e.g. switches the enclosure will not fit anymore. I add the Fusion360 archive to allow for remixes and mods.
UPDATE 07-NOV-2021
I added the version 2 with a different style of RJ12 connectors: tab down, reverse pins - the connectors must be soldered on the “right” PCB side, the side with the silhouette of the footprint of the connectors. I hope it helps you fellow astrophiles to find the right enclosure! ;-)
Enjoy!