Einsy Door Modified for Pursa i3 MK3 MMU2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
About The manual for the MMU2 upgrade requires you to cut the original Mk3 door on Part 3 Step 38 (version 1.0 manual)…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
About
The manual for the MMU2 upgrade requires you to cut the original Mk3 door on Part 3 Step 38 (version 1.0 manual) as seen in the picture below.
Instead of cutting the original I decided to modify the original einsy door for the mk3 so that modifying the door with tools wont be necessary.
Revisions
V0.1
This is the first iteration of model. It is currently untested as I do not currently have a MMU2 in my possession.
If you you test it and if it works or has issues, let me know so I can address them.
V0.2
Made the opening bigger to prevent wires from being squished.
Category: 3D Printer Parts