AMS Universal* 2-Tier Build Plate Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A universal* 2-tier AMS stand with optional, integrated build plate stand
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 141
- Wydruki
- 3
- Wyświetlenia
- 1155
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
There have been at least 6 versions of the AMS Bottom Cover Unit, each with variations on the number and size of vertical wall cavities. Because of this, it's been difficult for both modelers and makers to get the right fit. I've tried to solve that with this remix. I've also provided options for an integrated build plate holder and side brace.
There are four build plates in the print profile:
- Upper Left and Right Brackets
- Lower Bracket and Side Brace for either side
- Lower Left Bracket and Side Brace with plate holder
- Lower Right Bracket and Side Brace with plate holder
You can choose from several configurations, including:
- Without plate holder: 1 x Upper Brackets + 2 x Lower Bracket & Side Brace
- With plate holder on the left: 1 x Upper Brackets + 1 x Lower Bracket & Side Brace + 1 x Lower Left Plate Bracket & Brace
- With plate holder on the right: 1 x Upper Brackets + 1 x Lower Bracket & Side Brace + 1 x Lower Right Plate Bracket & Brace
- With plate holders on both sides: 1 x Upper Brackets + 1 x Lower Left Plate Bracket & Brace + 1 x Lower Right Plate Bracket & Brace
In addition to the printed parts, you will need the following:
- 4 x 400mm (or 420mm for full lid clearance) 2020 aluminum profile
- 4 x M5x10mm or 12mm + 4 x M5 T-Nut for side braces
For added stability, use the following optional parts:
- 2 x 380mm 2020 aluminum profile
- 4 x 6mm L-Joint Brackets and screws