1 / 4
Uncompensated Hammershot bottom rail filler remix — zdjęcie 1
1 / 4

Uncompensated Hammershot bottom rail filler remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixes an uncompensated hammershot mod filler piece into two for a slightly different approach

Ocena
0 / 5
Polubienia
9
Pobrania
38
Wydruki
0
Wyświetlenia
285
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Splitting the bottom uncompensated filler piece into two allows more forgiving tolerancing when shaving down the cut lines/hole IMO, as you can cut a little further for a loose fit, then superglue the halves into place in their respective shells. There's also the added benefit of printing with less supports.

I extended the faces because as you can see in my image, my cuts were more haphazard/aggressive/basic, just two lines across the shell, so this creates more necessary shell overlap to hide the cuts and provide more gluing surface area.

Cutting out the bottom section should yield 2 screws which you should be able to use here.

 

Make sure to visit 

To check out their work.

Tagi