Compact Flight Stick Bracket for Next Level Racing Boeing Simulator Seat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When using joystick extension tube, this bracket is designed to replace existing bracket on the NLR Boeing Sim Cockpit.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 259
- Wydruki
- 1
- Wyświetlenia
- 2307
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
If you have the Next Level Racing Boeing Flight Sim Cockpit and you want to use an extension tube on your joystick, this bracket will do the trick. It replaces the existing bracket to provide a mounting point approx 6" lower than the lowest position with the standard bracket.
It uses the same hardware to mount to the cockpit frame and joystick adapter plate. Once in place, you can add your extension tube while keeping the actual joystick at the appropriate height.
In the photos, you can see the difference between the original bracket and this model.
For printing the bracket, I used the following parameters:
Material: Qidi PLA Rapido
Layer Ht: 0.20mm
Infill: 40% (for added rigidity)
Supports: Brim and Organic Supports