1 / 2
Sterlite (80 Qt) gasket box container latch: M5 edition
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the 80 Qt version of the Sterlite gasket box, edited latch to be 3mm shorter.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 319
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (28)Powiązane
For the 80 Qt version of the Sterlite gasket box, the latches are slightly shorter.
For the latch to fit I ended up having to shorten the height by 3mm.
When I printed, I used my Bambu X1C with Bambu PETG-CF.
Here are my other settings (probably could have used filament, but wanted it to not break again so I increased the walls and solid layers from the default.)
- 0.24mm print height
- Wall loops: 4
- Top shell layers: 4
- Bottom shell layers: 4
- Sparse infill density: 30
- Sparse infill pattern: Gyroid