1 / 1
Shimano Di2 battery mount/shim for Colnago C64 — zdjęcie 1

Shimano Di2 battery mount/shim for Colnago C64

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to securely mount a Di2 battery in the seatpost of a Colnago C64 bicycle

Ocena
5 / 5
Polubienia
11
Pobrania
164
Wydruki
1
Wyświetlenia
1014
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a battery mount/shim to fit a Di2 battery in the seatpost of a Colnago C64. The wall thickness of mine is quite variable and there are seams, so I made two versions to test the fit, and have uploaded both. What also might work is to print one of them stretched slightly if you want to fine-tune.

“Narrow” will fit and hold, but you might want to add a blob of hot glue or add some tape to ensure it definitely doesn't fall (if your BB axle is exposed this will absolutely wreck your Di2 cables)

“Wide” is a very tight fit in mine and will very likely hold itself up permanently, but would be tricky to remove.

This design was inspired by a model made by reynoc for a Supersix.

Tagi