Leaf Blower & Battery Slatwall Mounts for Ryobi 40V
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool and battery holders for Ryobi 40V system for standard 3" Slatwall such as storeWall.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 163
- Wydruki
- 2
- Wyświetlenia
- 1159
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A collection of mounts for mounting Ryobi 40V tools onto Slatwall. I usually store my leaf blower without the battery inserted, just in case the little nub that holds it up can't handle the weight, but so far it seems plenty strong enough.
I used a 0.2mm layer height and the more perimeters the stronger - PLA+ and PETG both seem to be strong enough. You will need supports and also be sure to print them on their sides for strength.
I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but you should file the little latching nub down as needed to avoid any damage. Don't force it onto your wall if you feel too much resistance. You can and will damage PVC Slatwall this way.
I have only tested with storeWall as that is the only system I personally have, but in theory this should work for most 3" Slatwall if the dimensions are close enough.
Get 25% off CA Filament by using the following link: http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D