1 / 8
RACK IT 1000KG Sliding Door - 5mm Acrylic
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliding Acrylic Door Rails made to fit Bunnings Rack IT 1000KG System
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Sliding Acrylic Door Rails made to fit Bunnings Rack IT 1000KG System
I made a hinged door, but swinging out 600mm of the door wasn't practical so I made this system to slide the door.
Note: Some bottom rail pieces may need an area cut out if they collide with the horizontal support braces.
Update: Added double sliding option, this is not yet tested.
Printed on end, 1 part at a time with 15mm brim. Print as many as you need.
.2mm
No Supports
PLA