1 / 5
Dish Washer Wheel Ø40x8mm (Print in Place) — zdjęcie 1
1 / 5

Dish Washer Wheel Ø40x8mm (Print in Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dish Washer Wheel that is printed in place and should fit a lot of types.

Ocena
0 / 5
Polubienia
1
Pobrania
60
Wydruki
0
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

This prints a 40mm dishwasher wheel with the axle already printed in place. After the print you will need to break it loose. But then it works quite good.

Only print in PETG or ABS. PLA will melt in your dishwasher.

 

 

Tagi