1 / 3
DIN 35mm brackets for Meanwell LRS 150-24 power supply unit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and use DIN 35mm brackets for Meanwell LRS 150-24 power supply unit.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 299
- Wydruki
- 3
- Wyświetlenia
- 1296
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (81)Powiązane
DIN 35mm brackets for Meanwell LRS 150-24 power supply unit
Easy to print and use DIN 35mm brackets for Meanwell LRS 150-24 power supply unit.
| BOM (Bill of Materials) |
Printed Parts | |
|---|---|
| Printed parts | 2 |

PRINT GUIDELINES |
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3D PRINTING PROCESS | FDM (fused deposition modeling) |
| INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
| MATERIAL | PLAASA, ASA-CF, ABS, ABS+, ABS-CF |
| INFILL PERCENTAGE | 40% |
| LAYER HEIGHT | Recommended: 0.2mm |
| WALL COUNT | Recommended: 4 |
| SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
| EXTRUSION WIDTH | Forced 0.4mm |
Side notes to the print guidelines:
A wall count of 4 is an absolute must to ensure the structural integrity of the parts.
CHANGELOG |
| Date | Change |
| 06.04.2024 | Initial version (Rev1) |