Spigen Gearlock mounting arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification for Spigen Gearlock bike system with dual arms for heavier loads, retaining rigidity.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The presented model is a modification of the Spigen Gearlock system. The solution shown is fully compatible with the mechanism used in this system. Depending on the variant of the mechanism you have, printing an additional Mechanism element included in the STL files may be necessary.
My handlebar diameter is 30 mm, distance betwen arms is 46 mm.
There are two variants of the model. The first consists of the arm itself, ready for mounting the Spigen Gearlock system.
The second has been expanded to include a space for mounting lighting. The lighting options used in the original design include the KROSS SAFETY front bicycle light and the PROX SPIKA front bicycle light power bank.
Parts that cannot be printed:
- 4 M4 Nuts
- 4 M4x20 Screws
- 2 rubber padding (placed between arm mounting and handlebar for better grip)
Print Settings
Print with PETG for better impact strength and UV resistance
Supports:
Yes
Infill:
100%