Double Bottom Dog Biscuit Jar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dog biscuit jar with double bottom that sifts away those annoying crumbs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
About
A tall jar for dog biscuits with slotted bottom for crumbs. We keep dog biscuits in cylindrical jars but over time a mess of crumbs accumulates on the bottom. This jar has a double bottom with a screw-on lid that holds the crumbs.
Printing
Two versions of the jar are included, one with round holes and one with slits. The one with round holes turned out to be too difficult to print on my printer, the complex first layer pattern was prone to creating lift off artifacts that spoiled the print. The version with slits is easier on the printer.
The prototype was printed in PLA with 0.2 mm layer height, 3 perimeters and a fuzzy skin with thickness 0.1 mm starting above the outer thread, for a surface that is easier to grasp. The threads on the jar and the lid are somewhat tricky to align though, perhaps exchanging an even look of the fuzzy skin for a finer layer height on the threads would work better.
The thread dimensions and tolerance can be tuned in the sources.
Remember to use random seam position to avoid visible pattern on the jar.
Copying
Model source available at https://github.com/ceresek/prints/tree/main/things/box-sieve-threaded. Paw Print by Mistman123 from Wikimedia Commons (CC-BY-SA 3.0). Model CC-BY [email protected]. Using SolidPython and OpenSCAD.
