Ender 3 psu cover and case with RS5V for Pi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 pro psu cover with RS5V psu for Raspberry Pi this is my solution for upgrading the psu fan with an always on…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Ender 3 pro psu cover with RS5V psu for Raspberry Pi
this is my solution for upgrading the psu fan with an always on 80x80x25 Noctua
the original thermal controlled fan is mounted too, but was never needed so far
the electronics of my Ender 3 and a Raspberry Pi are mounted in a rear case
the psu for the Pi and an relay is mounted in the psu case
Printing:
0.4 nozzle, 0.2mm layer height
3 walls, 6 bottom and top layers, infill 30% cubic
support touching buildplate
included step files to easy modify
have fun!
IF SOMETHING IS NOT OK PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE
(sorry, english is not my native language)
Print Settings
Printer Brand:
Printer:
Ender 3 Pro
No
Supports:
Doesn't Matter
0.2 mm
Infill:
30% cubic
Filament:
3DJAKE ecoPLA Tough PLA Black
Category: 3D Printing