Hylian Shield Backing (No Edges)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backing for the Hylian shield without the edges https://www.printables.com/model/497231-hylian-shield-full-size
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 338
- Wydruki
- 1
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
This is a file for @mh_498145's Hylian Shield model. Several users asked for a backing to be posted and although one was given this had the edges which is a different colour from the backing. This remix allows the edges and backing to be printed separately.
The model is full size. It's very big so you will need to cut it up depending on how big your printer is. I chose to cut it in four pieces and print them standing up.
The pieces of the shield should fit on as is. There's some gaps to make it easier to fit them on.
The original model can be found here: https://www.printables.com/model/497231-hylian-shield-full-size