1 / 6
Tweak stick for Awesomatix A800MMX RC car — zdjęcie 1
1 / 6

Tweak stick for Awesomatix A800MMX RC car

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My version of a tweak stick for Awesomatix A800MMX the parts fit on a rod with 10 mm outer diameter I had some…

Ocena
0 / 5
Polubienia
7
Pobrania
117
Wydruki
0
Wyświetlenia
1229
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

My version of a tweak stick for Awesomatix A800MMX

the parts fit on a rod with 10 mm outer diameter
I had some aluminum tubes with 10 mm outer and 8.2 mm inner diameter lying around

simple version: use o-rings to hold the printed blocks in place; quick assembly and disassembly
'luxury' version: use the adjustment ring and the end cap
the end cap expands when the screw is screwed in

printing:
0.4 nozzle, 0.2mm layer height
for block: 3 walls, 4 bottom and top layers, infill 30% cubic
for ring and end cap: infill 100%

included step files to easy modify

have fun!

IF SOMETHING IS NOT OK PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE
(sorry, english is not my native language)

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

No

Resolution:

0,2mm

Infill:

30% cubic


Filament:

3DJAKE ecoPLA Tough PLA
black

Category: 3D Printing

Tagi