1 / 7
Spool Holder Wall, one part, big rolls (Ex: 2.5kg), 120mm — zdjęcie 1
1 / 7

Spool Holder Wall, one part, big rolls (Ex: 2.5kg), 120mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a filament spool holder that can be printed horizontally in one piece, which makes it particularly stable.

Ocena
5 / 5
Polubienia
8
Pobrania
56
Wydruki
1
Wyświetlenia
263
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
  • Print horizontally (on the flat side)
  • 6 Walls / Perimeters 
  • Infill: 25% Gyroid
  • 0.2mm layer height
     
  • Fast printer? Use a “strength” preset or lower the print speed (this improves stability)

The holder supports rolls with a width of up to 120 mm. Filament roll rolls well even without ball bearings (Bambu Lab A1 mini), additional sanding also helps but isn't necessary. I used PETG-CF but all common filaments should work well.

Tagi