1 / 4
Hood for Imou Dahua CP Plus Indoor CCTV camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects Sd card from accidental removal or loosening. Prevents accidental reset button press.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I made this model for IMOU Cue 2 camera. I wanted to create a hood covering SD card slot and the reset button. Made this model in FreeCad after a few trials.
Printed in Pure White Numakers PLA+ 1.75mm filament on 0.4mm nozzle Anycubic Kobra 2 Neo.
Layer height 0.3mm. Printed with rear side flat on bed and no infill.
This is my first design and print from scratch. Please try out in various materials and do give feedback. Feel free to remix, improve and share the model with attributions.
