Saxophone Tenor Reed. Good working !
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 slightly different Reeds. In comparison to Legere Signature these are in the range from 2 to 2,5
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 451
- Wydruki
- 0
- Wyświetlenia
- 1350
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I made these, taking the dimensions of the Legere Signature as a reference.
i tried ASA, ASA GF, Clear PCTG, and PETG CF (Prusa)
ASA and ASA GF were too soft. PCTG works quite well. I found the sound a litte too bright, for my taste.
The PETG CF works really well. I printed them on the smooth sheet, in 0,1 hight. 100% infill.
Also i decreased the speeds by half.
a very light sweep with 800 grid wet sanding paper softens the edges of the layer.
(Don't sand the tip itself !)
I play them on a 105 Burning Mouthpiece.
i made a basic body and cut it with a surface. The surface is made with a sweeping surface.
i added the Fusion sketch. An easy way to alter the reed is to just adjust the thickness (small amounts)
Or adjust the spline point of the middle line. Etc…