Motocycle Garage Door Opener Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a Garage Door Opener that fits on the handlebars. Multiple sizes to address different bikes.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount for a Garage Door Opener that fits on the handlebars. Multiple sizes to address different bikes.
- Garage Door Opener: Garage Door Opener Remote with Keychain, Replacement for LiftMaster/Chamberlain/Craftsman Garage Door Opener Remote, 4 Button Remote, Replaces 890MAX 893MAX G953EV-P2, 2 Pack - Amazon.com
- Bolts and Screws used are M3 sized
- I used a piece of batting under the arms so it doesn't scratch the bars. I would propose you do something similar.
Printed on a Prusa Mini with print pauses to account for dropping in an M3 nut in the arm an M3 nut in the top of the mount. Used a long m3 screw through the body (45). The arm as needed to secure it. .2 layer height with a .4 nozzle. Petg is some other suitable material that won't melt in the sun.
I used:
29mm - BMW (1250 GS)
26mm - Royal Enfield (Classic 350)
22 mm - Honda