1 / 5
Bambu Lab P1 and X1 Series Dual Glass Top Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to hold two Bambu Lab glass tops
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
After rearranging my printer rack where I no longer had an AMS on top of either my P1P or my X1C, I wanted to be able to take the top glass off for venting instead of leaving the door open. So I designed a stand to hold both sheets of glass for the printers. The base is wide enough that it keeps the glass from shaking even though it is on the printer rack.
I printed the stand with 3 walls and 15% cubic infill for some strength and a bit of extra weight.
Print Settings:
0.2mm Layer Height
3 Walls
15% Cubic