Werner fiberglass ladder tool caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient little box that clips into one of the holes on a Werner step ladder.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 869
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder.
Werner has updated the top plastic part of their fiberglass ladders and now has a system for attaching various Werner accessories. Check the included photo to see if you have the same top piece that I have, which this was designed to work with.
Hope you find it useful and please rate/post your make.
Print instructions
I printed it in PETG using a .6 mm nozzle, .3mm layer height, 2 perimeters, 15% infill and 5 top/bottom solid layers. A .8mm nozzle would speed up the print time if you have one. It does need supports since there is no orientation that can be used to avoid it. When I uploaded the .stl it placed it on it's side. Print upright and use paint on supports for the area sticks out from the box.