Cute Metal buckets (and dirt for extendable carrots)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While the buckets are cute on their own, the dirt works with these: https://www.printables.com/model/794382
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Posted with permission from 3DPmom (https://www.printables.com/model/794382).
I loved her extendable carrots but didn't want to print a whole set of 4, so I sculpted some dirt that works with Kmart's tiny ceramic pots.
I then found some silver filament and decided to make some tiny metal buckets these can go in too.
You can find here the buckets (with and without handles) in a variety of sizes. Please read the file notes to make sure you're printing compatible sets. You can use these for whatever you want, they're very cute, but if you print out the corresponding dirt patch they'll also work with 3DPmom's carrots (which I highly recommend you print, they make the best sound when you're plonking them in and out of these buckets).
The dirt patches work with Kmart's tiny pots (all except the narrow dirt).
The buckets without handles can be printed at 0.3mm layer height, I recommend printing the ones with handles at 0.2 to prevent sagging. You shouldn't need supports.
Enjoy!! :)