Hueforge - Hue Forge Color Change Narato
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Naruto - Hueforge - Hue Forge Color Change
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Naruto Uzumaki (うずまきナルト, Uzumaki Naruto) is a shinobi of Konohagakure's Uzumaki clan. He became the jinchūriki of the Nine-Tails on the day of his birth — a fate that caused him to be shunned by most of Konoha throughout his childhood. After joining Team Kakashi, Naruto worked hard to gain the village's acknowledgement all the while chasing his dream to become Hokage.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Numakers Black Transmission Distance: 0.3
PLA+ Numakers Royal Blue Transmission Distance: 3.2
PLA+ Numakers Outrageous Orange Transmission Distance: 10
PLA PolyLite Yellow Transmission Distance: 11
PLA+ Numakers White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Royal Blue
At layer #12 (1.04mm) swap to Outrageous Orange
At layer #15 (1.28mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.