Simplistic-living-in-space - Hueforge - Filament Painting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
imagined an image of another future with playground
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
With playgrounds.com created and customized with Krita.
You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out.
I started adding stl to my models. Please keep in mind, depending on your machine, slicing takes from seconds to maybe a couple minutes. I use a 5600X and it takes about 60 seconds for this one while others takes 2 min+ or more because of a lot of triangles.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark
PLA Elegoo Matte Gray
PLA Eryone Light Grey
PLA Eryone Matte White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Gray 1.3
At layer #9 (0.8mm) swap to Gray
At layer #14 (1.2mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.