QNAP 10gbe rack mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 2x QNAP QNA-T310G1S Thunderbolt 3 to 10gbe adapters
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I run Intel NUC's in my server rack for my virtualization. I wanted a way to properly hold the QNAP thunderbolt to 10gbe SFP adapters rather than just resting them on top of the NUC.
The print can hold the adapter in any direction (supports having the thunderbolt port facing the front if that is how your devices are setup).
I don't own the ethernet version of the adapter (QNAP QNA-T310G1T) so unsure if it fits. However, by online depiction, it appears to be dimensionally the same size.
Printed on Bambu X1C PETG 0.28mm default settings. No Supports, however I would probably add supports around the front operning if I was printing again.
Flip along X-axis for left-mounted rack mount.
3 versions supplied:
- Standard: which is close to half a rack in width with spacing between the adapters
- Compact: a narrower variant for smaller print beds
- Compact x3: Fits 3x adapters on one narrow print