Folding Table Wire Management Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wire management clip for a standard U.S. Folding table with a 21/32" (16.67mm) tabletop. You could probably enlarge it…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wire management clip for a standard U.S. Folding table with a 21/32" (16.67mm) tabletop.
You could probably enlarge it or shrink it in your slicer to fit different size tabletops. I recommend you do the math to estimate the percentage you need first since this takes over an hour to print. You could also bury part of it under the print bed in the slicer if you don't want it as wide as mine. Post a make if you try either mod, cheers!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
.20mm - 3 Shells
Infill:
20%
Filament:
[
](http://www.amazon.com/s?url=search-alias&field-keywords=SUNLU+PETG&tag=thingiverse09-20)[ SUNLU](https://www.amazon.com/SUNLU-Filament-1-75mm-Printer-Black/dp/B07Q82HVTT?dchild=1&keywords=sunlu&qid=1618263029&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRURLUURRQjZCS01DJmVuY3J5cHRlZElkPUEwODg0OTEzQlVYNklURjVBUFgwJmVuY3J5cHRlZEFkSWQ9QTAzNjgzNDZ&tag=thingiverse09-20) PETG Grey How I Designed This
About the design process...
I run Ubuntu Linux on all my home computers. This limits my choices for CAD software so I have taught myself how to use FreeCAD since there is a native Linux version that seems to be getting more stable as time goes by.
Category: 3D Printing