1 / 3
Snowpea shoe dryer wall mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convenient place to store a Snowpea shoe dryer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
⚠ Disclaimer: Hobbyist design, use at your own risk. Not liable for any damages or injuries.
I made this to have a convenient place to store my Snowpea shoe dryer, that would also allow me to use it with most of my shoes.
If the shoes are shorter or taller, it might not work, but you can easily remove the dryer from the mount and just use it like you would normally.
I printed this out of PETG. I wouldn't recommend PLA since it has a lower glass transition temperature.
I used command strips to stick it to the wall.
![]() |
|---|
