Raspberry Pi Snug Case with 75mm VESA Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a snug case with VESA mounts, so I cobbled together the mounts from https://www.thingiverse.com/thing:922740…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a snug case with VESA mounts, so I cobbled together the mounts from https://www.thingiverse.com/thing:922740 onto https://www.thingiverse.com/thing:1637227.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
.2mm
Infill:
20%
Notes:
Printed in YOYI PETG using the "Generic PET" settings in Slic3r PE (Prusa Edition).
Post-Printing
Mounting Raspberry Pi 3 inside case
The original case bottom has mounting holes for 2mm screws. The Raspberry PI 3 has holes for 2.5mm screws. American (Imperial) #4-40 x 1/4 IN fit the Pi mounting holes very well. I drilled and tapped the existing 2mm holes in the case bottom with an Irwin 4-40 #43 tap and the #4-40 screws are holding nice and firm.
Category: 3D Printing