Toolholder for Sienci Vortex Rotary Axis.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A place to store the extra bits and bobs for the Vortex Rotary Axis from Sienci Labs. Now at V3 for Skådis
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 292
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
V1:
I needed somewhere to store extra tools and jaws for the Vortex Chuck.
Printed with text down on a Prusa XL.
There is space for an 8x3mm magnet in the top of the face plate holder (beneath the #3 jaw holder).
I printed mine in wood PLA and red PLA with 0,32mm layer height and 0,6mm nozzle and 15% adaptive cubic infill.
--
V2:
I realized I needed somewhere to keep the screws holding the Vortex to the spoilboard when the Vortex is not in use. V2 is an update on three areas:
- I added slots for the screws holding the track to the spoilboard. I have a 30x30 MK2, so I needed place for 6 screws.
- I adjusted the angle of the jaws. The previous angle was somewhat shallow.
- I added space for the handle on the left side, so now it is mirrored, and you can choose whitch side you insert the handle. As a result, the space for the face plate is a bit higher up.
To keep the screws from sliding out I glued strips of velcro loop-side to the ceiling of the slots. In the picture this is the blue items just above the screws head.
This is printed in Polyalkemi Matte PLA Grey and add:north X-PLA Black with same settings as v1.
Support shown in red.
You can of course print it in any filament and settings you like.
--
V3:
I recently bought some IKEA Skådis boards, and hung one of them in my woodshop. So, I thought it would be time to add an option to hang the toolholder on the Skådis.
So the design is almost the same, just with track for the skadis universal peg holders.