Easter Bunny Earring Holder - Earring Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Earring Holder - Earring Stand
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial
🌟 RECOMMENDED 3D PRINTING SETTINGS 🌟
To ensure the best results for your 3D printing experience, we recommend the following settings:
📏 Layer Height: 0.2mm 🚀 Print Speed: 40 - 50 mm/s
Please note that the specific settings may vary depending on the slicer and 3D printer you use. These recommendations will help you achieve the finest quality when creating your clay cutters.
🌐 COMPATIBLE WITH 🌐
Our digital files are compatible with a wide range of popular 3D printing slicer software, including PrusaSlicer, Ultimaker Cura, IdeaMaker, Slic3r, Chitubox, and other 3D printing software options.
📜 TERMS OF USE 📜
Our files are for your personal use and enjoyment only, and they may not be shared, sold, or transferred in any manner without prior written consent. While you are free to use the templates for your personal projects, please refrain from distributing the files to third parties.
Feel free to use our files to create physical end products that you intend to sell, but remember that the files themselves should not be sold, transferred, or shared with others. Please do not upload these files to print-on-demand sites.