1 / 3
Laser Crosshair Holder for TwoTrees TT25 Laser Engraver — zdjęcie 1
1 / 3

Laser Crosshair Holder for TwoTrees TT25 Laser Engraver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This holds a red laser module for setting the starting point of a laser engraver for a TwoTrees TT25 laser engraver.

Ocena
0 / 5
Polubienia
0
Pobrania
34
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

I have a TwoTrees TT25 Laser Engraver that I've just started working with.  I was watching this video https://youtu.be/UeF0NW0m1Y8?si=MSqPCJgPEvX__Kvs  that talked about adding a crosshair for improved precision.  I decided that I wanted to try it, so I went and bought these laser crosshair modules  https://www.amazon.com/dp/B0CN9G7DTW?ref=ppx_yo2ov_dt_b_product_details&th=1  from Amazon. I got the ones with the USB plug on the end as I was going to just plug it into a wall wart to use it. After doing some digging, I discovered that the board on the engraver has a 5v output port, so I ended up cutting the USB plug AND the laser module off , attaching male JST Connectors to  each end of the wire: one to plug into the board and one to plug into the female JST connector that I added to the cable coming out of the laser module. I wanted to be able disconnect the crosshair laser after I got the engraving head  in  the correct place.

The holder press fits in the fins on the body of the laser engraving head and has an opening that allows for the crosshair to be focused depending on its distance from the engraving medium.

Printed in Overture Black PLA
Height: 0.2mm
Infill: 25% Lines

Tagi