Heat Gun Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a holder for my Bauer heat gun that would mount on the side of a shelf with screws
- Ocena
- 4,667 / 5
- Polubienia
- 77
- Pobrania
- 581
- Wydruki
- 3
- Wyświetlenia
- 2217
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I wanted a quick way to grab and put away my heat gun one handed, I had it hooked on the handle but that was too awkward while holding something else.
Fusion 360 CAD file included, all measurements are parameterized, you can adjust for other guns as needed in Fusion 360, just print SHIFT-P and edit the values, RingInsideDiameter being the most important value.
I used ASA in case it would get some heat from the gun when putting away right after use. PETG might be OK, let me know if you try it. I used 20% infill with 6 perimeter, 8 top & 8 bottom layers for strength.
Needs some support on the inside of the ring if you print with the base down like I did.