PreSonus Revelator io24 Hanger Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bracket to mount the PreSonus Revelator io24 audio interface to hang horizontally or vertically from whatever!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 945
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple bracket to mount the PreSonus Revelator io24 audio interface. I mounted it horizontalmy under my desk as having it off the top of my desk but very easily accessible was my main goal, and I think I accomplished that. I think it would work to mount it vertically as well as it squeezes it pretty tight and has holes for the feet to keep it from moving around.
For a single Installation you'll need to
- 1x Front Arm
- 1x Back Arm
- 2x Bases
Buy
- 4x Screws to mount it to your surface. I used #6 x ½” wood screws.
- 4x M3x12mm machine screws to attach the bases to the arms
- (optional) Rubber or Neoprene adhesive pad to protect the top of the unit. I cut them up a bit and adhered them to the underside of the top of the arms, where it would contact the Revelator, to protect it from the screws.
If you'd like to modify it, I have provided the FreeCad file. Most of the parameters are in the spreadsheet, which the rest of the model uses, and were directly measured off of my unit. The distance from the front edge to the from arm is fudged a little because the front arms weren't long enough initially.