Vive_Ultimate_Tracker_Screw-On-Mount_Haptic-Pancake_Wire-Crimping-System

• Print instructions

1. Drop files into the slicer “UltiMaker Cura” will do
2. Change nozzle size to 0.4mm on the printer
3. Set infill density to 20 or 40%
4. Change the print speed to around 70 to 80%
5. Start print
6. Take note that I am a novice to printing and 3D CAD please do not comment you hate me. I haven't worked in CAD since middle school.  :)

Should take about 4 hours to print in dynamic quality.

----------------------------------------------------------------------------------------------------------------

• Instructions so the tracker does not grow wings. I also take no responsibility for damages caused by the 3d prints you printed and used on your trackers. You have been warned.

1. Grab your bottle of super-glue.
2. Open bottle of super-glue.
3. Apply super-glue.

• Instructions on how to install the haptic pancakes will be out later in a YouTube video. Due to me not having haptic motors currently.

If you are looking to do the haptic pancake. Here are two parts you will need, links are provided below. That way you're ready for when I release a YouTube video or you can read the GitHub.

For more information on what haptic pancakes are please check out this GitHub and Discord channel. 

https://github.com/Z4urce/VRC-Haptic-Pancake

https://discord.gg/pmyR5vP4ae

Haptic pancake part list:

BQLZR 8mm Length Cooper Pogo Pin Connector Plated Gold Double Head Spring Probes Testing Pins Pack of 100 https://a.co/d/dN6kf94

https://www.aliexpress.us/item/3256805000956570.html?gatewayAdapt=glo2usa4itemAdapt (Please note that you need to buy the 10x2 millimeters size haptic motor DC)

Updates:

4/18 Finalized the design of the STL file. Also made printing the STL lot easier. :)

Credit to the following two people for creating the Haptic pancake software Z4urce, digitalf0x. Ty <3