Lockable Lazy Susan/Turntable, with plates for mounting a vise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pin lockable turn table with two vise plates
- Ocena
- 5 / 5
- Polubienia
- 144
- Pobrania
- 356
- Wydruki
- 2
- Wyświetlenia
- 3683
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So while working on modifying the Open Ball Vise to use fewer metal parts, I wanted to include turntable/lazy susan with it. Prints and works great, though I did sand the ball tracks. Works without lube, but I prefer it lubed, as it's quieter. I just used the super lube silicone grease I have for lubing the printer rails.
In the comments on the original ball vise, I noticed people mentioning a lockable table would be good, so I did that too. Might need to drill the holes out a tad to fit the pins, or sand the pins. should be 3.5 mm.
Also didn't want to need any screws or glue unless really needed, so I merged the vise base plate with the turn table top plate.
But ya know, I like this Bench Mountable Vise way better. Let's just go ahead and merge that in too.
Note: This is just the turn table. The Ball Vise can be found here: https://www.printables.com/model/836723-almost-fully-printable-ball-vise-no-screws-need-ju