Postage Stamp Holder Dispenser Wall Mount (Improved)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted postage stamp holder. Now has captive holder for roll of stamps, 2 piece no glue, large threads.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I wanted something that would hold both the stamp rolls and the flat sheets of stamps. My initial design lacked follow-through with design for the roll of stamps.
As you can see in the graphics, this is a two part assembly, will require some supports but fairly easy clean-up. Front panel on the flat stamp cards was increased by 50% thicker to make cleanup of the supports easier.
The threads are now quite large and no need to “work them in.” You will also find the the stamp roll holder will line up, as it should, with the slot at the top and horizontal as the cap bottoms out on the plate.
I have included the f3d file in case you would like to modify.