A switch panel for the Prusa Enclosure V2 and Ikea Lack table enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a panel to hold a light and a fan switch for the Prusa Enclosure V2 and Ikea Lack table enclosures
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About the different models

Faceplate v1 - Default
This panel has no logos

Faceplate v2 - Default
This panel has the logos below the switches, that are raised above the rest of the model by 0.40mm

Faceplate v2 - MMU
This panel has the logos below the switches, they are in better than the model as different parts so you can print it with your MMU or similar
Backplate - Default
All of the models above needs the back plate
Hardware needed and other modifications
1x M3 nut for the back plate
1x Countersunk M3x20mm screw
2x Switches (I used these link)
You need to make a hole roughly 25x45mm. doesn't need to be precise the front plate will cover it up, as long as the back plate have something to grab on :)