Blank Razor Key Caps from Razor Black Widow 2014 edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have wanted to make my own key caps for my razor keyboard and here they are it only took 3 HOURS TO CAD MODEL. if…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 465
- Wydruki
- 0
- Wyświetlenia
- 1774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I have wanted to make my own key caps for my razor keyboard and here they are it only took 3 HOURS TO CAD MODEL. if your wondering why it took three hours look at R1 XX because of just how insane that angle is on that key cap. The dimension were basically ripped from my own key caps so it should be in spec for them. Also dont use supports i have already including them its the little part on the key cap that is 1mm tall and should com off the key cap or else it wont be the right height on the keyboard.
I have also included the cad files for customization but good luck going though my terrible cad modeling for them
Also these will fit on cherry mx switches but i wouldn't recommend it since i'm pretty sure regular key caps don't have this much angle on them. I haven't modeled the wide keys or the space bar yet but if some else wants to go ahead and just tag it as a remix or something since that would be pretty cool to have an entire 3D printed key cap collection.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V1
Doesn't Matter
Supports:
No
0.15 reccomended
Infill:
100%
Notes:
There is a little bit of included support material on the bottom that needs removed.also rotate the part so that the switch top is facing up i f 'ed up the rotations
Category: Computer