Skipping rope handle with bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As my daughter has a tendency to break apart the end of her handle and that they had no bearing I designed one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
As my daughter has a tendency to break apart the end of her handle and that they had no bearing I designed one.
The thread of the adapter is tailored to fit the wooden part. You can change parameters in the FreeCAD file.
I didn't uploaded the stl of the adapter as it was quite heavy (~47MO).
The bearing is reused from rollerskate. Tight fit in the housing. Free to you to change the diameter in the related sketch.
As the diameter of the wooden thread was inferior to OD of the bearing (22mm) I splited the part and used thermal 3 M3 inserts.
You will maybe need a 4mm drill to prefit the insert before insertion. For a clean assembly I pushed a bit below the plan and then sanded on a table.
I printed in clear R-PET form FormFutura.
Nozzle 0.8mm, 220-5°C
Bed 70°C
Support only in screw well.
The 3mf is for a Prusa Mini with IS activated and a mini Sherpa extruder.