Lens Cap for Super-Takumar 135mm F3.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple friction-fit lens cap for a Super-Takumar 135mm F3.5 (Model 1) vintage lens. The tolerances for the part are…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Simple friction-fit lens cap for a Super-Takumar 135mm F3.5 (Model 1) vintage lens.
The tolerances for the part are designed for my printer and tuned for PLA. A PETG version will be coming in the future for outdoor use.
I don't know if this is compatible with all Super-Takumar 135mm F3.5 lenses as there are different models. Mine is a Model 1 made around 1964-65 based on the serial number.
I have provided the step file for those who need to change the dimensions if the lens that you have is slightly different.
Print Settings
Printer:
Voxelab Aquila
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.27
Filament: SUNLU PLA Black
Notes:
Should print in around 40 min at 0.27mm. I used a small brim but it's totally not necessary. The filet on the top and chamfer on the bottom may need sanding. Print with the hole facing up (The model is upside down oops sorry)
Category: Camera