1 / 3
"Rebel Alliance" Themed Geometric Wall Art (Star Wars) — zdjęcie 1
1 / 3

"Rebel Alliance" Themed Geometric Wall Art (Star Wars)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 models 19 cm in diameter that are themed to fit the "Rebel Alliance" logo from Star Wars.

Ocena
0 / 5
Polubienia
20
Pobrania
55
Wydruki
0
Wyświetlenia
246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Hello! These models are Star Wars themed, specifically for the “Rebel Alliance” theme. Multiple models are linked, two of which have a geometric backing, two of which do not. 
 

Printing:

Printing these models has never resulted in any failures. No supports are needed on the solid backed model, however, supports may be wanted on the geometric backed model.

In order to print the models with 2 colors, add a pause or a color change at 2.4 mm. I used Bambu PLA basic for all filament on these models, with a layer height of 0.1 mm.

 

Post Processing:

Support removal is fairly straightforward. Use any needle nose pliers, (ensure the “clamps” are open), to gently poke the supports. The pliers should only break through the film connecting the supports together. Once you have broken the film, tightly clamp down on the supports, and pull out.

If you liked this design, please check out my other two Star Wars themed designs, which are “Dark Side” themed logos.

Tagi