Napoleon Dynamite Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple Hueforge print of Napolean Dynamite. Printed in PLA with 0.2mm layer height.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
“Tina, you fat lard, come get some DINNER!”
.2mm layer height. Printed with rectilinear sparse infill and Hilbert curve top surface(I have found other top surface patterns are too shiny for my liking) I use brims on all my Hueforge prints and rarely have any adhesion issues.
Printed in PolyLite PLA:
Start with Black
2.2mm switch to Stone Blue
3.2mm switch to White
You can resize the print to fit your needs just make sure the height stays the same to ensure you get the same layer colors.
I like saving filament so I also print the first 2mm at 25% infill and never have any problems with print quality. I chose to do the print a little thicker to make it more durable but you can definitely trim off 1.8mm from the bottom and still be fine.
Also as a note I made this in Hueforge version 6