Phoenix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"I will live forever."
- Ocena
- 0 / 5
- Polubienia
- 79
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 904
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm pretty excited about this one. This model was inspired by the mythical phoenix and is designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. You should be able to size up fine, but I personally wouldn't size down too much, as it may cause issues.
I added the original STL, as well as two pre-painted 3MF files for use with Bambu Labs machines with an AMS. One 3MF is combined and ready to print, the other is separated, so you can easily change the colors of each section as you please.
I would love to see any prints, especially if you try different colors! :)