1 / 13
IK Foam Pro 12 Battery Holder for Mi Mijia 2 — zdjęcie 1
1 / 13

IK Foam Pro 12 Battery Holder for Mi Mijia 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mi Mijia2 Battery holder for the IK Foam Pro 12

Ocena
0 / 5
Polubienia
14
Pobrania
214
Wydruki
1
Wyświetlenia
928
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Battery Holder:

The IK Foam Pro 12 is a manual handpump that foams car cleaning products. The IK FP12 comes with a compressed air connector in the box.

Find the IK FP12 here:

https://www.cardetail.be/product/ik-foam-pro-12-sprayer-foam-spraypomp-10-liter/

or

https://amzn.eu/d/4YarI0Z

Combine the IK FP12 with the Mi Mijia 2 Portable Electric Air Compressor to make this a battery powered unit and make life so much easier!

Find the MM2 PEAC here:

https://amzn.eu/d/8vPUiUf

Plug:

When not in use and the hose detached, the MM2 switches off after a few minutes and the buttons go dead. In that case there was nothing much you could do but:

  • disconnect the MM2 hose from the FP12
  • Reinsert and then pull the hose back out of your MM2 to restart it / wake it up
  • reconnect your MM2 hose to the FP12

…which was an annoying thing to do with soapy fingers!

So I made a MM2 Plug, modeled after the battery hose nozzle, so you can keep your MM2 connected to the bottle and just use the MM2 Plug for the above procedure! Yay!

The MM2 Plug also has a tiny hole on the top so you can tie it to your MM2 hose using a strand of fishing line / string. Never lose that little thing ;-)

Two versions of the Plug: one with and one without an internal reinforcing screw (M3x40mm). Just be gentle when inserting the screw near the end of the print so you don't topple it!


 

Tagi