Weather Station with a Custom Radiation Shield - One piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elevate Your Weather Station with a Custom Radiation Shield
- Ocena
- 4,6 / 5
- Polubienia
- 52
- Pobrania
- 361
- Wydruki
- 7
- Wyświetlenia
- 1790
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Elevate Your Weather Station with a Custom Radiation Shield
Introduction:
Upgrade your weather station setup with a specially crafted radiation shield, designed to optimize sensor performance and accuracy.
This single-piece solution (printed in 4h) enhances your weather monitoring capabilities by mitigating the impact of direct sunlight and external factors on sensor readings.
Printing Instructions:
Employ bridging mode in your slicer software to print the radiation shield seamlessly in one piece, ensuring robustness and durability.
Here is my printing setup:
- Printer: Creality CR-20 Pro
- Settings:
- Layer height to 0.2mm
- Bridging mode enabled
Compatibility:
Compatible with a wide range of 3D printers and suitable for various filament materials, offering versatility in customization and usage.
Assembly:
Mount the printed radiation shield onto your weather station's sensor assembly, ensuring proper alignment and positioning for optimal shielding effectiveness.
I used M2 screws, but you can probably modify the holes to suit your needs. You can also modify the base to adapt it to your sensor/placement location.