Harmonica holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for diatonic blues harmonica.
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 877
- Wydruki
- 8
- Wyświetlenia
- 3152
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
I discovered that there is no harmonica holder on Printables. So I designed one. This is just a simple harmonica holder but it should work with most of the diatonic harmonicas. I checked it with my Hohner Silverstar and some unbranded ones. It could even work with different sizes and shapes (It works with my Hohner Puck).
Printing
Just print it with standard settings for 0.2mm layer height. You need two pieces of small-bolt and two hinge-bolts. Three other parts should be printed once. I used PLA but it should work with PETG and other materials.
Assembly
Assembly is straightforward. Just connect everything with 3d printed bolts as shown on the pictures.
Mounting harmonica
Depending on you instrument, It can be mounted just by pressing or you need to loosen the small bolts a bit.