Keyholder Keyhole Key Holder Lock Closer Room Internal Door Schlüsselhalter Schlüsseltürhalter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keyholder Keyhole Closer
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey :)
i designed a little key holder for internal room doors. So the key doesn't fall out of the lock.
It also reduces the noise coming from the other side of the door.
I printed it in TPU 95A.
My keyholes have this size:
widht: 8.5mm
high: 15.5mm
I added a Keyholeholder with a little hole to see if there is light or not on the opposite of the door. And i added a Keyholecloser to close the Keyhole on the opposite of the door. With and without hole.
________________________
TPU or TPE is not easy to print for beginners. Use the right settings in your slicer or use the preconfigured 3mf file ;)
Also very important is:
Release the pressure from the retraction of the filament (bondtech gears)
Increase the nozzle temp if you encounter issues (235C is just perfect)
No retractions!
Print with slow speed! 20-40mm/s
If you have problems with the filament sensor, deactivate it.